Replies to This Discussion

Permalink Reply by Robert E Dickinson on April 26, 2008 at 9:43am

Hi Dan,

If you use the newer converter you get this SWMM5 data set., There seems to be something wrong with the rainfall data - which I will look at for you.

Here is the file I just converted:

Attachments:

• dan_cso_SW5.INP, 235 KB

• ▶ Reply

Permalink Reply by Dan on April 26, 2008 at 9:26am

I am trying to convert a SWMM RUNOFF file from 4.4 to 5.0 but it keeps giving me an error on ALL of the H1 cards. Not sure what the problem is. The file runs fine in 4.4h

Attachments:

• CSO_SSO.txt, 75 KB

• ▶ Reply

Permalink Reply by Robert E Dickinson on April 22, 2008 at 10:59am

The EPA website converter is a few years out of date.

• ▶ Reply

Permalink Reply by wes on April 22, 2008 at 10:57am

My converter was from the EPA website and looked slightly different than yours. After downloading from the link on the previous page it worked fine???? Thanks

• ▶ Reply

Permalink Reply by Robert E Dickinson on April 21, 2008 at 8:17pm

See how I loaded your two files:

• ▶ Reply

Permalink Reply by wes on April 21, 2008 at 8:14pm

I am trying to repeat your bit of magic here and can't. I took the spaces out of the filename and put the files on the C drive and I get the same error.

• ▶ Reply

Permalink Reply by wes on April 21, 2008 at 7:30pm

Thanks again, I knew it would be something silly like that. You saved me lots of time here.

• ▶ Reply

Permalink Reply by Robert E Dickinson on April 21, 2008 at 7:28pm

You cannot use a space in a directory name. I was able to convert it by putting the two files on the C drive and running the translation program:

Here is the SWMM 5 input file that was created.

Attachments:

• 100yr24hPreExtran_SW5.INP, 5 KB

• ▶ Reply

Permalink Reply by wes on April 21, 2008 at 7:13pm

I am getting run time error 52, bad file name or number. here are the two files i am using to convert.

Attachments:

• 100yr24h Pre Extran.dat, 2 KB
• 100yr24h Pre.dat, 2 KB

• ▶ Reply

Permalink Reply by Robert E Dickinson on April 21, 2008 at 6:58pm

Yes that is an Extran file:

SW 1 0 0
MM 3 20 21 22
$EXTRAN

Add the same SW and MM lines and then you should be able to convert the runoff and extran files together.

• ▶ Reply

Permalink Reply by wes on April 21, 2008 at 6:55pm

If this *.dat file is the runoff file, is this the extran file?

Thanks for your time, this is really helpful.

Attachments:

• 100yr Pre 24-hr Huff Extran.dat, 2 KB

• ▶ Reply

Permalink Reply by Robert E Dickinson on April 21, 2008 at 6:49pm

You have a PC-SWMM file; you need to add the SW and MM lines at the top of the data file to make it convert:

SW 1 0 0
MM 3 10 11 12
$RUNOFF

Once you do this you should be able to use the REGULAR SWMM4to5converter.exe to make a SWMM 5 file,

• ▶ Reply

▶ Reply to Discussion

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page