Replies to This Discussion

Permalink Reply by Robert E Dickinson on April 26, 2008 at 10:01am

You will find it on the Forum item:

SWMM 3 and 4 Conversion Tools for SWMM 5

▶ Reply to This

Permalink Reply by Dan on April 26, 2008 at 10:24am

Robert,

I just downloaded it this morning from the Forum section under this description:

Updated Converters as of February 1st , 2008
Attachments:
SWMM4to5_Converter.exe, 396 KB
XPtoEPA4_2005.exe, 488 KB

▶ Reply to This

Permalink Reply by Robert E Dickinson on April 26, 2008 at 10:30am

This is the file or executable I just used - I will look into the rainfall problem for you later;

Attachments:

• SWMM4to5_Converter.exe, 580 KB

▶ Reply to This

Permalink Reply by Dan on April 28, 2008 at 8:05am

Robert,

I was able to debug by looking at another SWMM 5 file I had from another project. I have one question. The converter seems to have created a 'Calibration' section of the SWMM 5 input file that is not recognized by SWMM 5 when I try to open it. If I comment out that section it works fine. Any thoughts?

Thanks,

Dan

Attachments:

• elyria_SW5FULL.inp, 1.3 MB

▶ Reply to This

• 1
• 2
• 3